The RHQ and RHN press transfer systems offer best-in-class in transfer speeds and accuracy. The RHQ fully synchronizes with stamping presses via remote control panel, while the RHN offers the same capabilities with an overhead controller.
The RHN120 advanced conveyance robot offers best-in-class speed, stability and enhanced operability. This series combines best-in-class conveyance speed with superior accuracy, resulting in increased productivity compared to previous models. A friendlier interface and one-touch removal system are just a few of the improvements that ensure precise performance to meet the needs of the next generation of customers.
The RHN120 offers cycle times of 1.5 seconds, compared to 1.7 seconds for previous models, resulting in improved efficiency and energy consumption.
The RHN120 series of inter-press conveyance robots provides the best-in-class conveyance speed with superior accuracy, greatly increasing productivity compared to previous models. With safety at the base of all improvements, this series enhances ORII & MEC’s already well-established smooth, high-speed conveyance and advanced accuracy. A friendlier interface and one-touch removal system are just a few of the improvements that ensure precise performance to meet the needs of the next generation of customers.
Cycle time has been reduced from 1.7 seconds (existing models) to 1.5 seconds, establishing a best-in-class conveyance speed which contributes to efficiency and energy conservation.
Improved feed bar flexibility and support methods. Reduced vibration of the hand unit enhances conveyance speed.
Built-in panel interface facilitates better operability and visibility. Teaching functions are more convenient, switching lines is easier than ever, and the various energy-saving modes make environmentally-conscious operations routine.
The RHN Robot Series now comes with our unique one-touch hand removal device as part of the standard specifications, greatly reducing time required to replace units for setup changes. The one-touch removal method introduces a tool-free system that replaces the bolted on method, trimming the work required for adjustments.
| Model | RHＱ120S1 | RHＱ120L1 | |
|---|---|---|---|
| Feed Length | Inch | 39～47 | 47～59 |
| Vertical Stroke | Inch | 1～3 | 1～3 |
| Cycle Time ※1 | sec | 1.5～※2 | 1.8～※3 |
| Max.Workpiece Weight ※4 | Lb | 8.8×2 | 8.8×2 |
| Repeatability ※5 | Inch | ±0.3 | ±0.3 |
| Workpiece pick up | Vacuum/Magnet | ||
| Weight | Lb | Aprox. 661 | Aprox. 661 |
※1 Rarely affected by Workpiece form.
※2 The total weight of Workpiece and finger.
| Model | RHN120S1 | RHN120L1 | |
|---|---|---|---|
| Feed Length | Inch | 39~47 | 47~59 |
| Vertical Stroke | Inch | 1~3 | 1~3 |
| Cycle Time ※1 | sec | 1.5～ | 2.3～ |
| Max.Workpiece Weight ※2 | Lb | 8.8×2 | 8.8×2 |
| Repeatability | Inch | ±0.012 | ±0.012 |
| Servo Motor Power | kW | 3.0 (Feed) 1.5 (Up/Down) | |
| Workpiece pick up | Vacuum ・ Magnet | ||
| Weight | Lb | 661 | 661 |
※1 Rarely affected by Workpiece form.
※2 The total weight of Workpiece and finger.
