LCC-HL.png

LCC HL Series Coil Straightener-Feeders

The LCC HL series of coil straightener-feeders handle material from 600 mm (23″) wide to 1,300 mm (51″) wide and up to 6.0mm (0.236″) thick.

    • 1. Superior flatness

      Combining the power of the heavy-duty HL unit with the straightening performance of eleven work rolls (six upper and five lower), the HL coil straightener-feeder delivers exceptional flatness on materials up to 6.0mm (0.236″) thick.

    • 2. Ease of maintenance

      The HL coil straightening-feeder includes work rolls which can open to 20 degrees, making roll cleaning easier and faster. The machine was designed to allow easy access to the inside structure for improved maintenance.

    • 3. Work Rolls Drive System Side Gear System

      The feed roll is equipped with gears that drive each roll.

    • 4. Controllers

      Our original TP-CSS control systems offer complete operating systems designed to optimize production efficiency, planning and maintenance.

    • 5. Performance

      The LCC HL series offers four times the frame rigidity of standard conventional equipment. Superior rigidity, combined with a high-torque roll drive system (HLU model)* allow the machine to straighten high-tensile steel. * Refer to the work roll drive system

  • Model06HLS08HLS10HLS13HLS06HLU08HLU10HLU13HLU
    Stock Thicknessinch 0.024～0.236 0.024～0.236 0.024～0.236 0.024～0.236 0.024～0.236 0.024～0.236 0.024～0.236 0.024～0.236
    Stock Widthinch 2～23 2～31 2～39 2～51 2～23 2～31 2～39 2～51
    MAX.Coil Masslb 6,615 11,025 15,435 15,435 6,615 11,025 15,435 15,435
    MAX.Coil O.D.inch 55 55 55 55 55 55 55 55
    Coil I.D.inch 20 20 20 20 20 20 20 20
    Feed Length（※）inch ～19 ～19 ～19 ～19 ～19 ～19 ～19 ～19
    MAX.Line Speedft/min ～72 ～72 ～72 ～72 ～72 ～72 ～72 ～72
    Work Roll Number― upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5 upper6/lower5
    Main MotorkW AC11.0 AC11.0 AC11.0 AC11.0 AC30.0 AC30.0 AC30.0 AC30.0
    Mandrel Expansion― pneumatic pneumatic hydraulic hydraulic pneumatic pneumatic hydraulic hydraulic
    Reel MotorkW 2.2 2.2 3.7 3.7 2.2 2.2 3.7 3.7
    Powerv 200/220 200/220 200/220 200/220 200/220 200/220 200/220 200/220
    Operating AirPSI 71 71 71 71 71 71 71 71

    ※：In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option） must be provided.

     

  • Straightening PerformanceStock Width (inch)
    Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
    Stock Thickness
    (inch)    		0.031～0.090 23 31 39 51 23 31 39 51
    0.110 36 36 36 36
    0.126 28 28 28 28 28 28
    0.157 17 17 17 17 18 18 18 18
    0.177 14 14 14 14 14 14 14 14
    0.197 11 11 11 11 11 11 11 11
    0.236 7 7 7 7 8 8 8 8

    ※ The above figures are for the material having a yield strength of 35500PSI max.

     

    Straightening Performance
    (For High tention materials)    		Stock Width (inch)
    Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
    Stock Thickness
    (inch)    		0.090 10 9 9 9 21 21 21 21
    0.098 9 9 8 8 18 18 18 18
    0.110 8 7 7 7 14 14 14 14
    0.126 6 6 6 6 11 11 11 11
    0.157 5 5 5 5 7 7 7 7
    0.177 4 4 4 4 5 5 5 5
    0.197 4 4 4 4 4 4 4 4
    0.236 3 3 3 3 3 3 3 3

    ※ The above figures are for the material having a yield strength of 87000PSI max.
    ※ Specifications are subject to change for improvement without notice.





  •