AFC Series Roll Feeder

The AFC series is a new type of compact NC roll feeder, providing sophisticated automation technology in an elegant form.

    • 1. Design

      The AFC series’ compact design incorporates an integrated main unit and control panel, which can be installed to bolsters on either side of a press.

    • 2. Material Capacity

      Supports a maximum width of 500 mm (19″) and stock thickness of 3.2 mm (0.126″) despite its compact size.

    • 3. Performance

      The AFC series features a vibration-proof structure, protecting the main unit and control panel from press vibrations. It also includes an integrated brake motor, designed to prevent coiled strips from falling out after the power supply is turned off. Air feeding is also included to improver feeding performance.

    • 4. Operation

      The feeding pitch is easily set via a membrane key switch.

  • ModelAFC02AFC03AFC05
    Stock ThicknessInch 0.008~0.126
    Stock WidthInch 0.7~7.8 0.7~11.7 0.7~19.6
    Stock Thickness×Stock WidthInch 0.008~0.090×7.8
    Feed LengthInch 393
    (Indicates the capacity of the feeder)
    Roll Liftspm MAX. 150 MAX. 120
    RepeatabilityInch Within ±0.008
    Pass LineInch 3.1 to 5.8
    Above the Bolster
    Motor PowerkW AC 0.75
    Power Supplyv 200/220
    Feed Roll Pressurize Air Cylinder + Spring
    Roll Lift Mechanism Air Cylinder
    Entry Stock Side Guide Entry Stock Side Guide
    Manual Fixed Width Guide End of Stock Detector